ac centrifugal fan forward curved, dual inlet with housing (large flange) D4E180-CA02-02 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 7938 81-0 fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com limited partnership headquarters mulfingen county court stuttgart hra 590344 general partner elektrobau mulfingen gmbh headquarters mulfingen county court stuttgart hrb 590142 nominal data type D4E180-CA02-02 motor m4e068-la phase 1~ 1~ nominal voltage vac 230 230 frequency hz 50 60 type of data definition fa fa valid for approval / standard ce ce speed min -1 1250 1280 power input w 380 495 current draw a 1.68 2.16 motor capacitor f 10 10 capacitor voltage vdb 400 400 min. back pressure pa 0 0 min. ambient temperature c -25 -25 max. ambient temperature c 60 35 starting current a 3.3 3.1 ml = max. load me = max. efficiency fa = running at free air cs = customer specs cu = customer unit subject to alterations data according to erp directive installation category b efficiency category total variable speed drive no specific ratio * 1.00 * specific ratio = 1 + p f / 100 000 pa actual request 2013 request 2015 overall efficiency e % 32 31.4 38.4 efficiency grade n 42.6 42 49 power input p e kw 0.21 air flow q v m3/h 1130 pressure increase p f pa 219 speed n min -1 1410 data definition with optimum efficiency. lu-105030 the erp data is determined using a motor-impeller combination in a standardised measurement configuration. item no. 11270-5-9980 revision 82891 release 2014-04-15 page 1 / 5 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 (0) 7938 81-0 fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com
ac centrifugal fan forward curved, dual inlet with housing (large flange) D4E180-CA02-02 technical features mass 10.24 kg size 180 mm surface of rotor coated in black material of impeller sheet steel, hot-galvanised housing material sheet steel, hot-galvanised motor suspension motor anti-vibration mounted on both sides direction of rotation counter-clockwise, seen on rotor type of protection ip 54 insulation class "b" humidity class f3-1 max. permissible ambient motor temp. (transp./ storage) + 80 c min. permissible ambient motor temp. (transp./storage) - 40 c mounting position any condensate discharge holes none operation mode s1 motor bearing ball bearing touch current acc. iec 60990 (measuring network fig. 4, tn system) < 0.75 ma motor protection thermal overload protector (top) wired internally protection class i (if protective earth is connected by customer) product conforming to standard en 60335-1 approval ccc item no. 11270-5-9980 revision 82891 release 2014-04-15 page 2 / 5 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 (0) 7938 81-0 fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com
ac centrifugal fan forward curved, dual inlet with housing (large flange) D4E180-CA02-02 product drawing 1 connection line pvc 4g 0.5 mm2, 4 x brass lead tips crimped connection screen u1 blue z brown u2 black pe green/yellow item no. 11270-5-9980 revision 82891 release 2014-04-15 page 3 / 5 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 (0) 7938 81-0 fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com
ac centrifugal fan forward curved, dual inlet with housing (large flange) D4E180-CA02-02 charts: air flow 50 hz druck p f s[pa]fr rho=1,2kg/m^3 qv[m^3/h] 2.400 2.200 2.000 1.800 1.600 1.400 1.200 1.000 800 600 400 200 0 qv[cfm] 1.400 1.200 1.000 800 600 400 200 0 p f s[pa] 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 p fs_e[in h2o] 1,05 1 0,95 0,9 0,85 0,8 0,75 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,35 0,3 0,25 0,2 0,15 0,1 0,05 0 p f s[pa] 1 2 3 4 air performance measured as per iso 5801 installation category a. for detailed information on the measuring set-up, please contact ebm-papst. suction-side noise levels: lwa measured as per iso 13347 / lpa measured with 1m distance to fan axis. the values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. with any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. measured values 1 2 3 4 u v 230 230 230 230 f hz 50 50 50 50 n min -1 1250 1330 1385 1430 p e w 380 302 245 191 i a 1.68 1.34 1.10 0.89 qv m 3 /h 2155 1810 1375 900 p fs pa 0 100 180 220 u = supply voltage f = frequency n = speed p e = power input i = current draw qv = air flow p fs = pressure increase item no. 11270-5-9980 revision 82891 release 2014-04-15 page 4 / 5 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 (0) 7938 81-0 fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com
ac centrifugal fan forward curved, dual inlet with housing (large flange) D4E180-CA02-02 charts: air flow 60 hz druck p f s[pa]fr rho=1,2kg/m^3 qv[m^3/h] 2.400 2.200 2.000 1.800 1.600 1.400 1.200 1.000 800 600 400 200 0 qv[cfm] 1.400 1.200 1.000 800 600 400 200 0 p f s[pa] 390 380 370 360 350 340 330 320 310 300 290 280 270 260 250 240 230 220 210 200 190 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 p fs_e[in h2o] 1,55 1,5 1,45 1,4 1,35 1,3 1,25 1,2 1,15 1,1 1,05 1 0,95 0,9 0,85 0,8 0,75 0,7 0,65 0,6 0,55 0,5 0,45 0,4 0,35 0,3 0,25 0,2 0,15 0,1 0,05 0 p f s[pa] 1 2 3 4 air performance measured as per iso 5801 installation category a. for detailed information on the measuring set-up, please contact ebm-papst. suction-side noise levels: lwa measured as per iso 13347 / lpa measured with 1m distance to fan axis. the values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. with any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. measured values 1 2 3 4 u v 230 230 230 230 f hz 60 60 60 60 n min -1 1280 1470 1600 1660 p e w 495 410 331 280 i a 2.16 1.79 1.48 1.29 qv m 3 /h 2180 1915 1450 1075 p fs pa 0 140 260 300 u = supply voltage f = frequency n = speed p e = power input i = current draw qv = air flow p fs = pressure increase item no. 11270-5-9980 revision 82891 release 2014-04-15 page 5 / 5 ebm-papst mulfingen gmbh & co. kg bachmhle 2 d-74673 mulfingen phone +49 (0) 7938 81-0 fax +49 (0) 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com
|
